|The Measuring Range:||Gage Pressure: (-100kpa~0~1kpa~260 Mpa )(optional) Differential Pressure: (0~500pa~3.5MPa)(optional) Absolute Pressure: （0~10 Kpa~50 Mpa） (optional)||The Level Of Accuracy:||0.05% FS 0.1% FS 0.2%FS|
|The Acquisition Speed:||1~30 Seconds/time||The Display Mode:||6 Figure Dynamic Display, The Percentage Bar Charts|
|The Built-in Power Supply:||3.6 Vdc High-energy Industrial Lithium Battery (renewable)||Medium Temperature:||- 40 ℃ ~ 180 ℃|
|The Working Environment:||- 30 ℃ ~ 70 ℃, Humidity < 90%||Explosion-proof Marks:||ExiaIICT6|
oem pressure transmitter,
liquid pressure transducer
OEM Pressure Sensor PT218 Storage Type Pressure Sensor For Oil Industry
PT216 Storage type pressure gauge is a pressure sensor can measuring pressure and temperature same time with data storage instrument. 1200 million the data collection and storage, use the built-in memory and external memory card design, storage and backup double at the same time; Read data, USB communication and supporting software, software of data collection, analysis, report forms and curve display to give you an efficient data processing; Six figures very eye-catching; this series pressure sensor is the experiment data acquisition essentials.
Ⅰ, 11 kinds of unit display; Customizable.
Ⅱ, Acquisition speed (0.025 ~ 7200 )s/time; Free setting
Ⅲ, Storage and backup controlling double insurance; Safe and reliable
Ⅳ, More than 1200 million data storage, storage density can be divided into 10 section programming
Ⅴ, Buttons for magnetic induction pen design; anti-interference, not easy to damage
Ⅵ,Intuitive pressure bar charts; Intuitive and easy to understand
Ⅶ, Signal isolation technology; Electromagnetic resistance, power frequency interference technology; To ensure that the data is correct.
Ⅷ, Zero since the stabilizing technology; Automatic temperature compensation technology; Stable and reliable
1.Oil and gas pressure data collection and storage, analysis.
Urban water network, heat supply network and gas network pressure data 2.collection and storage, and analysis
3.Laboratory tests and analysis
4.Meet the demand of industry measuring instrument testing standards
Precision reached a magnitude of 0.05
5.Meet the demand of high precision pressure acquisition
6.Meet the demand of industry measuring instrument testing standards
1. The measuring range:
Gage pressure: (-100kpa~0~1kpa~260 mpa )(optional)
Differential pressure: (0~500pa~3.5MPa)(optional)
Absolute pressure: (0~10 kpa~50 mpa) (optional)
2. The level of accuracy:.0.05% FS 0.1% FS 0.2%FS.
3. The acquisition speed: 1~30 seconds/time
4. The display mode: 6 figure dynamic display, the percentage bar charts
5. Storage medium: built-in memory, and external SD card, (mini SD card)
6. The built-in power supply: 3.6 Vdc high-energy industrial lithium battery (renewable)
7. Overload pressure: 1.5 ~ 3 times of range, depending on the measurement range
8. Medium temperature: - 40 ℃ ~ 180 ℃
9. The working environment: - 30 ℃ ~ 70 ℃, humidity < 90%
10. Explosion-proof marks: ExiaIICT6
11. Process interface: M20 x 1.5 (male)customized or according to user requirements
12. The configuration Software: Software storage table special Software
The battery working time
|Acquisition time ( seconds)||
1. Open the SD card storage, storage interval as 1 second;
2. Internal storage space for 1 second.
Note: the battery life is affected by instrument working environment, such as temperature, humidity, etc.
Use one-off high-energy lithium batteries, The model is AtechB2161.
Nominal capacity (with 3mA~2A) : 19000 mAh
Rated voltage: 3.6 V
Battery temperature: 55 ℃ ~ 85 ℃
Vibration resistance: conform to the severe degree of vibration level V.S. 3.
A set of products include: measuring probe, store display instrument, two SD card, a set of software. A piece of the battery
Dimensions of pressure sensor
Storage display section
Placed in memory SD card at storage. need to read data as long as change SD card, card reader on the computer with a special software can read, software can also analyze the data, and interpretation. Data can also be imported into Excel form for recording.
Contact Person: leaves