|
Product Details:
|
| Frequency Range: | 26G | Antenna: | Horn |
|---|---|---|---|
| Process Connection: | Flange | Measuring Range: | 30m |
| Accuracy: | ±3mm | Process Temperature: | -40～130℃,-40～250℃ |
| Process Pressure: | -0.1～4.0Mpa | ||
| High Light: | 26G Non Contact Oil Level Sensor,Flange Radar Oil Level Sensor,Horn Antenna Radar Level Sensor |
||
Products non contact radar oil level sensor transmitter range configuration manufacturer
Radar level sensors are typically housed in a single assembly, combining the transmitter and receiver antenna in one device.
The two main types of radar level sensors in use are Air-to-Air Radar (TAR) and Guided Wave Radar (GWR).
Airborne radar level sensors are the most commonly used type because they are non-contact and easier to install. The emitted magnetic waves fan out from the sensor until they hit the surface of the liquid and are reflected back. The main disadvantage of the TAR level sensor is that the electromagnetic pulse energy is attenuated by the longer distance and the lower dielectric process medium. TAR level measurement technology can be used in aggressive chemical applications as it does not come into contact with the fluid being measured.
Guided wave radar types include a waveguide mounted in front of the sensor to focus microwave pulses and boost the reflected wave energy. This makes it possible to use GWR-type sensors with lower dielectric process media that would otherwise degrade the performance of TAR-type sensors.
Radar level sensors are mounted above the liquid level on the top of the tank, or on a platform that spans the top of the open tank.
How does radar level measurement work?
The device operates according to the FMCW method (FMCW = Frequency Modulated Continuous Wave). Electromagnetic pulses in the GHz range are sent to the medium at different frequencies between 77 and 81 GHz. Since the transmitter is constantly changing the frequency of the transmitted signal, there is a frequency difference between the transmitted and reflected signals. Subtract the frequency of the reflected signal from the frequency of the transmitted signal at that time to obtain a low-frequency signal proportional to the horizontal distance. This signal is further processed to enable fast, reliable and highly accurate level measurement
Speifications
Applications
● City water supply
● Sewage treatment
● Tank level monitoringT
● Water-saving irrigation
● Circulation fluid monitoring
Contact Person: Jason
Tel: 86-13992850820
