|Level Range:||200~1500mm (Can Be Shorted ,customizable)||Medium:||Gasoline, Diesel , Fuel, Kerosen|
|Resolution:||≤1mm||Rated Current For Alarm Switch:||500mA|
|Operating Temperatures:||- 40 To 85°C|
Capacitive Diesel Fuel Level Sensor,
Digital Diesel Tank Level Sensor 500mA,
PL332 Truck Tank Level Sensor
Atech Digital GPS Capacitive Diesel Fuel Level Sensor For Truck Tank
PL332 Capacitance fuel level sensor is used to continuously detect fuel level by measuring the capacitance variations as the liquid level changes, which can be easily shortened to fit the different tank depths. It can carry out real-time monitoring with GPS tracking system, can directly replace the fuel level sensor and connect the instruments in original car; With the characteristics of strong stability and long service life.
Compact industrial oil level sensor, suitable for high-quality oil products below 5MPA, the temperature is not high, the viscosity is measured below 200°C, and various communication protocols can be added;
Vehicle oil level sensor, suitable for the measurement of various fuels at normal temperature and pressure, the output damping time is adjustable from 30-180s, and the band is 485;
Standard industrial-grade oil level sensor, suitable for viscous oil measurement below 5MPA and temperature below 200°C, can be attached with multiple communication protocols;
High temperature and high pressure industrial oil level sensor, suitable for various measurements below 32MPA and oil temperature below 250°C, and can be attached with various communication protocols;
The general-purpose oil level sensor is suitable for various fuels at normal temperature and pressure, and the measured hydraulic oil is 485.
● Plastic and aluminum alloy material, light weight and low cost
● Simple and strong structure, anti-vibration
● Reed switch, steady output signal
● Long using life, wear resistance
● Without limitation of environment
● Length can be customized
Fuel level sensors are widely used in fuel, water, kerosene, chemical tanks for trucks, generators/gensets, buses and ships. The principle of electromagnetic induction is used to output signals stably and continuously. The sensor is made of plastic and aluminum alloy materials, featuring light weight and low cost.
We have the 0-190ohm/240-33ohm , the length of sensor can customize, if you need other signal and length, if you need wholesale or dropping shipping, welcome to contact to us.we support all wholesale and drop shipping.
Contact Person: Jason