|Level Range:||200~1500mm (Can Be Shorted ,customizable)||Maximum Operating Current:||<15mA|
PL332 Fuel Level Probe,
Capacitive Diesel Fuel Tank Level Probe,
700mm Fuel Tank Level Probe
Atech PL332 700mm High Resolution Capacitive Diesel Fuel Tank Level Probe
PL332 is a high precision capacitive fuel level sensors, designed to monitor the fuel consumption, loadings, offloadings and thefts on all types of vehicles, including agricultural, construction, mining and other machinery as well as stationary deposits, tanks, generators, etc...
Compact industrial oil level sensor, suitable for high-quality oil products below 5MPA, the temperature is not high, the viscosity is measured below 200°C, and multiple communication protocols can be installed;
Vehicle oil level sensor, suitable for measuring various fuels under normal temperature and pressure, output damping time is adjustable from 30 to 180s, and the frequency band is 485;
Standard industrial-grade oil level sensor, suitable for viscous oil measurement below 5MPA and temperature below 200°C, and can be attached with various communication protocols;
High temperature and high pressure industrial oil level sensor, suitable for various measurements below 32MPA and oil temperature below 250°C, and can be attached with multiple communication protocols;
The general-purpose oil level sensor is suitable for various fuels under normal temperature and pressure, and the measured hydraulic oil is 485.
● Suitable for truck, generators/genset, bus and marine field
● Widely used in fuel, water, kerosene and chemical tanks
● OEM quality, widely used on automotive and marine OEM
● Reed switch, Continuous and steady output signal
● Simple and strong structure, Advanced corrosion resistance
● Long using life, anti-vibration,anti-explosion
● High quality fuel and water level sensor
● Economical level sensing solution, long service lifespan
● Without limitation of environment,length can be customized
Fuel level sensors are widely used in fuel, water, kerosene, chemical tanks for trucks, generators/gensets, buses and ships. The principle of electromagnetic induction is used to output signals stably and continuously. The sensor is made of plastic and aluminum alloy materials, which has the characteristics of light weight and low cost.
We have the 0-190ohm/240-33ohm , the length of sensor can customize, if you need other signal and length, if you need wholesale or dropping shipping, welcome to contact to us.we support all wholesale and drop shipping.
Contact Person: Jason