|Ultrasonic Sensor:||Low Power-sensor||Power Supply:||OEM:DC12V, AC220V|
|Beam Angle:||12°||Operating frequency:||55K±10Khz|
|Accuracy:||OEM: FS≤1m, Accuracy Can Be ±1mm FS≤2m, Accuracy Can Be ±3mm FS≤15m, Accuracy Can Be ±0.25% FS||Working environment:||Normal Pressure, Non-explosion-proof; Non-corrosive Environment OEM: Anti-explosion Symbol Exia II AT3 (DC12 V,range≤10m ) The Material Sensor Housing: PTFE For Large Power Sensor Strong In Corrosion Resistance|
Ultrasonic Diesel Level Sensor,
Ultrasonic Fuel Tank Level Gauge,
AC220V Diesel Level Sensor
Ultrasonic Diesel Level Sensor Indicador De Nivel Del Tanque De Combustible
|Ultrasonic sensor||Low power-sensor||Middle power-sensor||Large power-sensor|
|The Max. range||≤5m||≤7m||≤10m||≤10m||≤12m||≤15m|
|Blind area||Standard: 300mm||350mm||500mm||500mm||600mm||800mm|
|Power supply||Standard: DC24V||DC24V||DC24V||DC24V||DC24V||DC24V|
|OEM:DC12V, AC220V||/||OEM:DC12V, AC220V||/|
Standard: ±0.5%F S or ±5mm;
(at 25℃, Absolutely flat target under the condition of standard)
OEM: FS≤1m, accuracy can be ±1mm
FS≤2m, accuracy can be ±3mm
FS≤15m, accuracy can be ±0.25% FS
|Standard: 4-20mA (3 wires)|
OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v
0-10v, 1-10v (both signal can not be customized DC12v)
RS485(MCU protocol as default, Address=01, bps=9600)
4-20mA+RS485; 1-5V+RS485, 1~2NPN
1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM
|Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface|
OEM: Level mode; the distance of level surface to level bottom(the bottom of tank)
NOTE: Ensuring the distance of sensor surface to the level bottom is the actual mounting
height, otherwise might be have installation error.
|Working temp.||Standard: 0~50℃|
|OEM: Negative Temp. -10℃,-20℃,-30℃; Positive Temp. 60℃,70℃,80℃|
|Wiring Mode||Quick connect type terminal(can be customized cable outlet about 1m)|
|Installation||Screw type or sifter clamping ; screw size: M68*2.0mm|
|Protection class||IP65, OEM of IP66, IP67, IP68|
|Normal pressure, non-explosion-proof; non-corrosive environment|
OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m )
The material sensor housing: PTFE for large power sensor
Strong in corrosion resistance
1.When level range ≥15m, equip with other type ultrasonic sensors
2.Users no need to set the address, bps, installation height, so please verify to factory
3.For RS485-PC product, users can adjust the parameter by software(the default software)
The max measure range depends on the smooth level surface, so please confirm the real
Combined ultrasonic sensor, temperature sensor, ultrasonic servo circuit and transmitter circuit. Adopts SMD components, ASC chip and plated circuit boards, ensure the product with small volume but good long term reliability.
NLEPF compound material housing, endurable and with good acoustic property.Suitable for most of sites and user friendly.
● STABLE AND RELIABLE ANALOG OUTPUT
● ADJUSTABLE PROJECTION PANEL
● NLEPF SYNTHETIC MATERIAL SHELL
● Depth well level measurement
● Industrial tanks
● Detection of tanker oil level
● Water treatment
● Hydraulic monitoring
● High pool level
Notes for selection range of ultrasonic level sensor:
For example, in a tank for measuring hydrochloric acid level, due to the strong volatility of the medium, the air in the tank may suspend a large number of fine liquid particles, which will scatter part of the sound waves of the ultrasonic level gauge. For this phenomenon, when the liquid drops to a lower level, the ultrasonic liquid level gauge may not receive echoes. Therefore, it is recommended that the user increase the measurement distance by 30-50% when selecting the range. For example, for a 6-meter-high tank, it is best to use a 10-meter Uson-11 ultrasonic liquid level gauge for measurement.
◆20 years in hydrology and meteorology wireless communication industry
◆Apply in more than 50 countries & areas
◆Support OEM/ODM cooperation
1.Q: How long is the delivery?
-- Mostly within 10days
2.Q:Can I get a sample?
-- Sure, contact our sales please
3.Q:What is your MOQ?
4.Q: How about warranty time?
5.Q: How can I visit your factory?
-- Fly to Xian Yang air port, it’s our pleasure to pick you up.
6.Q:How do you control your quality ?
-- We have EPR system .we control from parts, process, testing, packing ,retesting.
Every Sensor will be tested two times before reach you, after that sport test for the third time. Make sure about the quantity.
In order to recommend the suitable sensor, please kindly advise us the following information
1..What is your testing medium ? oil, water, gas, waster water, or others.
2.Working temperature of the sensor ? -40°C~100°C or others
3.Pressure range ? -1-0bar,0-1bar,0-16bar,0-40bar,0-100bar,0-600bar or others
4.Output signal? 4-20mA, 0-5V ,0.5-4.5V,0-10V,RS485 or other
5.Electronic connection ? DIN43650 ,Packard, Aerial plug, direct cable or others.
6.Screw ? M20×1.5,G1/4,G1/2,R1/2,NPT1/2
Contact Person: Jason
Ultrasonic sensor: Low power-sensor
Working temp: OEM: Negative Temp. -10℃,-20℃,-30℃; Positive Temp. 60℃,70℃,80℃
Output signal: RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN 1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM
Accuracy: FS≤15m, accuracy can be ±0.25% FS