|Ultrasonic Sensor:||Low Power-sensor||Power Supply:||OEM:DC12V, AC220V|
|Beam Angle:||9°||Operating frequency:||40K±5Khz|
|Accuracy:||Standard: ±0.5%F S Or ±5mm; (at 25℃, Absolutely Flat Target Under The Condition Of Standard)||Output Signal:||OEM: 4-20mA(4 Wires), 0-20mA, 0-5v, 1-5v 0-10v, 1-10v (both Signal Can Not Be Customized DC12v)|
Ultrasonic Analog Sensor,
PL320 Ultrasonic Level Sensor,
5M Waterproof Ultrasonic Level Sensor
PL320 0.25%FS High Performance Ultrasonic Liquid Level Sensors Supplier Price
|Ultrasonic sensor||Low power-sensor||Middle power-sensor||Large power-sensor|
|The Max. range||≤5m||≤7m||≤10m||≤10m||≤12m||≤15m|
|Blind area||Standard: 300mm||350mm||500mm||500mm||600mm||800mm|
|Power supply||Standard: DC24V||DC24V||DC24V||DC24V||DC24V||DC24V|
|OEM:DC12V, AC220V||/||OEM:DC12V, AC220V||/|
Standard: ±0.5%F S or ±5mm;
(at 25℃, Absolutely flat target under the condition of standard)
OEM: FS≤1m, accuracy can be ±1mm
FS≤2m, accuracy can be ±3mm
FS≤15m, accuracy can be ±0.25% FS
|Standard: 4-20mA (3 wires)|
OEM: 4-20mA(4 wires), 0-20mA, 0-5v, 1-5v
0-10v, 1-10v (both signal can not be customized DC12v)
RS485(MCU protocol as default, Address=01, bps=9600)
4-20mA+RS485; 1-5V+RS485, 1~2NPN
1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM
|Standard: Distance mode, the distance of ultrasonic sensor surface to measuring target surface|
OEM: Level mode; the distance of level surface to level bottom(the bottom of tank)
NOTE: Ensuring the distance of sensor surface to the level bottom is the actual mounting
height, otherwise might be have installation error.
|Working temp.||Standard: 0~50℃|
|OEM: Negative Temp. -10℃,-20℃,-30℃; Positive Temp. 60℃,70℃,80℃|
|Wiring Mode||Quick connect type terminal(can be customized cable outlet about 1m)|
|Installation||Screw type or sifter clamping ; screw size: M68*2.0mm|
|Protection class||IP65, OEM of IP66, IP67, IP68|
|Normal pressure, non-explosion-proof; non-corrosive environment|
OEM: Anti-explosion symbol Exia II AT3 (DC12 V,range≤10m )
The material sensor housing: PTFE for large power sensor
Strong in corrosion resistance
1.When level range ≥15m, equip with other type ultrasonic sensors
2.Users no need to set the address, bps, installation height, so please verify to factory
3.For RS485-PC product, users can adjust the parameter by software(the default software)
The max measure range depends on the smooth level surface, so please confirm the real
Ultrasonic level sensors are used for non-contact level sensing of highly viscous liquids, as well asbulk solids. They are also widely used in water treatment applications for pump control and open channel flow measurement.
● Range of up to 60 meters
● Level or material measurement
● Level or material measurement
● Response speed is adjustable
● Easy Installation
● River water level measurement
● Lake water level measurement
● Shallow water level measurement
● Hydrological monitoring
● Environmental protection
Ultrasonic water liquid level transmitter:
This type sensor is used for non-contact level sensing of highly viscous liquids, as well as bulk solids. They are also widely used in water treatment applications for pump control and openchannel flow measurement. The sensors emit high frequency (20 kHz to 200 kHz) acoustic waves that are reflected back to and detected by the emitting transducer.
◆Apply in more than 50 countries & areas
◆Strong R&D team, senior staff more than 60
◆Support OEM/ODM cooperation
1.Q: How long is the delivery?
-- Mostly within 10days
2.Q:Can I get a sample?
-- Sure, contact our sales please
3.Q:What is your MOQ?
4.Q: How about warranty time?
5.Q: How can I visit your factory?
-- Fly to Xian Yang air port, it’s our pleasure to pick you up.
6.Q:How do you control your quality ?
-- We have EPR system .we control from parts, process, testing, packing ,retesting.
Every Sensor will be tested two times before reach you, after that sport test for the third time. Make sure about the quantity.
In order to recommend the suitable sensor, please kindly advise us the following information
1..What is your testing medium ? oil, water, gas, waster water, or others.
2.Working temperature of the sensor ? -40°C~100°C or others
3.Pressure range ? -1-0bar,0-1bar,0-16bar,0-40bar,0-100bar,0-600bar or others
4.Output signal? 4-20mA, 0-5V ,0.5-4.5V,0-10V,RS485 or other
5.Electronic connection ? DIN43650 ,Packard, Aerial plug, direct cable or others.
6.Screw ? M20×1.5,G1/4,G1/2,R1/2,NPT1/2
Contact Person: Jason
Ultrasonic sensor: Low power-sensor
Working temp: OEM: Negative Temp. -10℃,-20℃,-30℃; Positive Temp. 60℃,70℃,80℃
Output signal: RS485(MCU protocol as default, Address=01, bps=9600) 4-20mA+RS485; 1-5V+RS485, 1~2NPN 1-10V, 0-10V, 4-20mA(two wire) - Power supply 24VDC can not be OEM
Accuracy: FS≤15m, accuracy can be ±0.25% FS