|Supply Voltages:||10 To 32V||Resistance Range:||0 To 190Ω|
|Current Range:||0 To 20mA Or 4 To 20mA||Mounting:||5 Pieces Of M5 Screws And 2 Mm Thick NBR Gasket, Or Recommended 2 Mm Thick FPM Gasket If Be Used In Gas Tank.|
|Flanges:||Various Types Of Flanges Are Available For Fitting Fuel Tank If Necessary||Connector:||Brand Delphi, Tyco Or Others Is Available According To Customer's Requi Rement|
IoT Monitoring Lube Oil Level Sensor,
PL330 Oil Level Sensor,
32V Fuel Level Sensor
Electronic Level Sensor Fuel Management System Oil Level Indicator PL330
Brand new combination of digital oil level gauge and sensor float - digital LED light display, real-time understanding of oil level status - front cover is made of 316 stainless steel, even in acid-alkali or humid environment. - The wire harness connector has buckles to ensure a firm connection between the instrument and the wire harness, and it is still reliable in applications with strong vibration. - Sophisticated waterproof structure design, waterproof and dustproof.
Compact industrial oil level sensor, suitable for high-quality oil products below 5MPA, the temperature is not high, and the viscosity is measured below 200 ° C, and various communication protocols can be added;
Vehicle oil level sensor, suitable for the measurement of various fuels at normal temperature and pressure, the output damping time is adjustable from 30-180s, and the band is 485;
Standard industrial-grade oil level sensor, suitable for viscous oil measurement below 5MPA and temperature below 200°C, can be attached with multiple communication protocols;
High temperature and high pressure industrial oil level sensor, suitable for various measurements below 32MPA and oil temperature below 250°C, and can be attached with various communication protocols;
The general-purpose oil level sensor is suitable for various fuels under normal temperature and pressure, and the hydraulic oil to be tested is 485 .
● Plastic and aluminum alloy material, light weight and low cost
● Simple and strong structure, anti-vibration
● Reed switch, steady output signal
● Long using life, wear resistance
● Without limitation of environment
● Length can be customized
|Material||Plastic and Aluminum alloy|
|Length range||100 to2,000mm for standard (can be customized)|
|Installation||SAE standard 5 holes|
|Flanges||Various types of flanges are available for fitting fuel tank if necessary|
5 pieces of M5 screws and 2 mm thick NBR gasket,
or recommended 2 mm thick FPM gasket if be used in gas tank.
Brand Delphi, Tyco or others is available according to customer’s Requi
|Supply voltages||10 to 32V|
|Rated current for alarm switch||500mA|
|Resistance range||0 to 190Ω|
|Voltage range||0.5 to 4.5V or 0 to 5V (can be customized)|
|Current range||0 to 20mA or 4 to 20mA|
|Operating temperatures||- 40 to 85°C|
|Resolution range||10 to 40mm|
Fuel level sensor is widely used in fuel, water, kerosene, chemical tanks and suitable for truck
, generators/gen set, bus and marine field. With the electromagnetic induction principle, it ca n output signal stably and continuously. The sensor uses plastic and aluminum alloy material and has the characteristics of light weight and low cost.
We have the 0-190ohm/240-33ohm , the length of sensor can customize, if you need other signal and length, if you need wholesale or dropping shipping, welcome to contact to us.we support all wholesale and drop shipping.
Contact Person: Jason